STAR-CCM+ Benchmark: Dambreak - Femto Engineering - Femto Engineering

STAR-CCM+ Benchmark: Dambreak

In this article you can read the findings of a STAR-CCM+ benchmark our CFD engineers performed.

Why a STAR-CCM+ benchmark?

Femto’s main activity is to validate designs and optimize the performance of systems, structures, and products with help of simulations.  Detecting flaws in the design prior to physical testing can lead to significant cost savings. The efficacy of simulation technology depends on how well the simulation matches real-word conditions. In our experience engineers are very curious and can be wary of the sometimes black-box nature of simulation software. To gain confidence in your model and methods benchmarks play an important role.



The dambreak experiment, as performed by MARIN, is used as a testcase to verify the behavior of water in a STAR-CCM+ CFD simulation. The experiment consists of a tank with a retractable door behind which a body of water is present. When this door is rapidly retracted the water will start moving due to gravity. A three-dimensional simulation has been set up with STAR-CCM+ 2020.1 using the same geometry and water starting location as was used in the test to verify the water behavior predicted by STAR CCM+.


The case

The case consists of a tank with a length of 3.22m and a width and height of 1m. As an initial condition the water is present in a cube from x = 2m (total length of 1.22m), a width of 1m and a height of 0.55m. At x = 0.67m a box is present with a length of 0.16m, a width of 0.4m and a height of 0.16m.

At t = 0 the water is released and can flow freely towards the box. In the experiment the pressure is measured at eight points (P1-P8) where four points are present on the back of the box and four points are present on the top of the box. For the comparison only points 1 and 5 (P1, P5) are used. The water height is measured at four locations in the experiment, for the comparison two locations are used, location 2 (at x = 1m, H2) and location 4 (at x = 2.66m, H4).


In STAR-CCM+ use is made of the volume of fluid (VOF) model using both water and air.


On the interval 0.5s – 6.0s, the average water height error on location 2 is 2.1%. The average error for the pressure on point 1 is 2.1% on the interval 0.5s – 6.0s. The maximum average error is found when comparing the pressure at point 5 to the measured pressure. The average pressure error on the interval 1.0s – 6.0s on point 5 is 22.3%.

The first pressure peak occurs at the same time as found in the experiment, but the pressure reduces more quickly than in the experiment. The second pressure peak (around t = 4.5s) starts a little later than in the experiment.


It can be concluded that a good comparison is present between the results of the experiment and the results of the STAR-CCM+ simulation. If you enjoyed this post and would  like to get updates on our work, follow us on LinkedIn, Twitter or Youtube. We really appreciate every subscriber, comment and thumbs up. Thanks for reading and watching our videos!

mei 26, 2020
Hoe kunnen wij u helpen?

Heeft u vragen of interesse in één van onze diensten? Neem dan vrijblijvend contact met ons op. Wij helpen u graag.

over ons

Femto Engineering biedt als ingenieursbureau totaaloplossingen voor complexe Computer Aided Engineering (CAE)  in de vorm van consultancy, software, detachering, trainingen, technische ondersteuning en R&D. Wij zijn een geautoriseerde reseller van Simcenter Femap, Simcenter 3D, Simcenter Nastran, Simcenter Star-CCM+ en SDC Verifier in de gehele Benelux.

Privacy policy


Loop voorop in FEA & CFD

Schrijf je nu in voor onze nieuwsbrief en ontvang maandelijks FEA kennis, nieuws en tips gratis in je inbox.