Multistep SOL 401/402 - Femto Engineering - Femto Engineering

Multistep SOL 401/402

Siemens Digital Industries Software will upgrade the Advanced Nonlinear solver (SOL601) to the Multistep Nonlinear solver (SOL401/402) as of January 1, 2022.

If you have any questions regarding the upgrade, please contact us via the form at the bottom of this page, by phone or via support@femto.nl.

We will periodically update this page.

best practices

SOL 401 nonlinear capabilities

SOL 401 is a multi-step, structural solution that supports a combination of subcase types (linear, dynamic, preload, modal, Fourier, cyclic). SOL 401 supports large strains and large displacements, large rotations, and nonlinear materials. SOL 401 is supported as a standalone solver, it can be used in Simcenter 3D Pre/Post, and is supported in Simcenter Femap’s Analysis Set Manager. SOL 401 is also the structural solution used by the Simcenter 3D Multiphysics environment within the Pre/Post application. The Multiphysics environment supports all combinations of structural-to-thermal and thermal-to-structural coupling with the Simcenter 3D Thermal solution.

SOL 402 nonlinear capabilities

SOL 402 is a multi-step, structural solution that supports a combination of subcase types (static linear, static nonlinear, nonlinear dynamic, preload, modal, Fourier, buckling and complex eigenvalues extraction) and large rotation kinematics. SOL 402 is supported as a standalone solver, it can be used in Simcenter 3D Pre/Post, and is also supported in Simcenter Femap’s Analysis Set Manager. SOL 402 supports large strains and large displacements, large rotations, and nonlinear materials.

401/402 solvers

The Multistep solvers work with subcases. In these subcases different analysis types can be defined. It is possible to do a static analysis first and then switch to a transient analysis where the static results will be the initial state.
It is also possible to just use the global case and define the analysis there. This is similar to a sol 601 analysis set.
Fact Sheet

 

Read about our best practices through the link below. We’ve added two examples as well to make it more clear.

best practices

If you have any questions regarding the upgrade, please fill in the form below.

Question SOL 401/402

Name(Vereist)

consultancy

Working with Femto Engineering means that you can rely on our extensive consulting expertise in FEA, CFD and simulation of injection moulding. We have a reliable and flexible team that can work with you to achieve your engineering goals.

read more

software

The software you use must get the job done. The analysis and simulation solutions from our partner, Siemens Digital Industries Software, will do just that. We also offer related advice, support and training.
read more

r&d

Through research and innovation, we support our customers in being at the forefront of new technology. That is why we invest in R&D and work closely with leading research institutes and universities.
read more

Hoe kunnen wij u helpen?

Heeft u vragen of interesse in één van onze diensten? Neem dan vrijblijvend contact met ons op. Wij helpen u graag.

over ons

Bij Femto Engineering helpen we bedrijven hun innovatieve ambities te bereiken met specialistische engineering consultancy, software en R&D.
Wij zijn Siemens DISW Smart Expert Partner voor Simcenter Femap, Simcenter 3D, Simcenter STAR-CCM+ en SDC Verifier. Neem contact met ons op en laat FEM en CFD voor u werken.

Privacy policy

×

Loop voorop in FEA & CFD

Schrijf je nu in voor onze nieuwsbrief en ontvang maandelijks FEA kennis, nieuws en tips gratis in je inbox.